Sunday, June 28, 2026

Development of thermal energy water deposits

Thermal power development projects are formed either for individual areas of birth places or layers (lack of hydrodynamic connection between layers) or for the place of occurrence as a whole.

Development projects are drawn up on the basis of approved operational reserves of thermal energy waters, study of well drilling and core data, industrial geology and geophysics materials, results of hydrological studies, documents obtained as a result of exploration.

Industrial exploration projects are developed for a period of up to 5 years at the location of the deposit with unconfirmed reserves.

The designer supervises the implementation of the development project and issues recommendations to improve the development status.

The project for the development of the place of birth of thermal energy waters provides a comprehensive solution to the main technological and technical and economic issues related to the maximum extraction of discovered thermal energy waters

The development project must contain the following provisions:

a) initial geological and industrial data obtained in the process of exploration and reconnaissance work;

b) justification of the selected development system, annual production levels, technological operation mode of wells, feasibility of maintaining reservoir pressure;

c) justification of the system and place of waste water discharge;

d) program and scope of work on the study of wells;

e) initial data for drawing up the development project.


The first section of the project should contain:

a) general data about the area, physical-geographical and climatic conditions;

b) brief data on geological studies indicating the number of drilled wells and technical characteristics;

c) brief stratigraphy indicating aquifers;

d) tectonic structure of the area and place of origin;

e) hydrological characteristics of the place of origin;

f) brief physical-lithological and thermophysical characteristics of productive horizons;

g) data on physical-chemical properties.


The second section of the project includes:

a) justification of operational facilities and selection of the development system;

b) development of operational flows;

c) well operation conditions;

d) recommendations for additional exploration of the location;

e) selection of the order and sequence of drilling and commissioning of wells;

e) selection of the method of opening the board and intensification of water production;

g) selection of well design taking into account the geological and tectonic parameters of the formation, water composition, bottomhole, thermal insulation;

g) calculations of changes in formation and bottomhole pressure, water composition temperature in degrees, salt formation conditions;

h) injection of waste water into the formation.


The third section of the project includes:

a) data on the utilization of thermal energy water;

b) basic technical and technological solutions;

c) a set of research works.


The fourth section of the project includes:

a) justification for drilling observation wells;

b) control over changes in flow rates;

c) determination of the limit levels of permissible reduction in reservoir pressure and reservoir temperature.

Saturday, June 20, 2026

Technical and economic feasibility of using thermal energy waters in production sharing agreements

For the most effective study of the location of thermal energy waters, it is necessary to adhere to the stages of geological exploration work, and to conduct a timely geological and economic assessment of the research results.

Study of the location should be sufficient for a reliable assessment of thermal energy water reserves.

Based on the results of the preliminary investigation, a feasibility report is prepared and temporary conditions are developed.

In cases where the explored thermal energy waters are intended for heat supply of small facilities and temporary conditions do not exist.

Operational reserves of thermal energy waters are divided into balanced (absorbed using technologies) and unbalanced (the use of which is temporarily impractical) according to their purpose.

Materials for calculating thermal energy water reserves should include: 

a) an assessment of the total operational reserves of groundwater at the place of origin, the degree of their exploration; 

b) recommendations for the operation mode; 

c) issues of sanitary protection of groundwater; 

d) an assessment of the impact of water abstraction at the expense of water consumption on existing water intakes, as well as on surface sources, ecological and other natural conditions of the area.

If necessary, additional exploration of flanks and aquifers may be carried out at the source of thermal energy waters involved in industrial development.

When transferring the place of origin, a control check of the wells must be carried out to determine the flow rates, gas saturation temperature, water composition, and the tightness of the space.

Saturday, June 13, 2026

Features of drilling wells in thermal water conditions

The design of exploration and production wells must be airtight and ensure the discovery of productive horizons on technical water, without reducing the reservoir properties of the bottomhole zone of the formation.

The water intake section of the well is equipped by the geological characteristics of the aquifer and the stability of the underlying rocks.

In the presence of unbroken reservoir layers, an open wellbore is designed.

In conditions of weak cement and drainage rocks, which complicate the mine, wells are equipped with filter columns.

The final question of equipment for the water-receiving part should be decided on the basis of the study of core material and geophysical data on the reservoir.

The diameter of the production string and tubing is determined by the site development project.

To assess the performance of formations during drilling, it is necessary to perform tests in the wellbore of up to 20% of the occurrence area.

For development and operation, the well must be equipped with fountain fittings, pressure, temperature, and flow rate measurements.

When developing the place of birth of thermal energy waters, the presence of pumping and compressor pipes is determined by the development project.

After establishing the connection of the wells with the formation, replacing the drilling fluid with technical water and causing the inflow of formation water, it is necessary to stabilize the chemical composition of the water along the wellbore.

Test and operational pumpings are carried out from wells drilled during exploration. 

The purpose of test pumpings is to obtain initial data for a preliminary assessment of the filtration properties of water-bearing rocks and changes in water quality, and to determine the capabilities of exploration and operational wells.

Research pumping is carried out to determine hydrological parameters, boundary conditions and the relationship of aquifers.

In production sharing agreements, the costs of retrofitting exploration facilities and the costs of research work to streamline drilling in conditions where wells are surrounded by thermal energy waters are of extremely importance.

Saturday, June 6, 2026

Thermal energy waters in the context of mineral extraction under production sharing agreements

The birthplace of thermal energy waters should be considered to be a part of the aquifer system that is used for industrial and domestic needs.

Thermal waters are most often associated with aquifers of artesian-basin folded areas and in massive fractured rocks.

Based on the complexity of hydrothermal conditions and the geological structure of aquifers, geologists distinguish three groups of thermal energy waters:

first group: a place of birth with simple hydrogeological conditions, with calm occurrences of aquifers, well-maintained in terms of capacity and filtration properties of water-bearing rocks with relatively homogeneous and geotemperature fields. 

The first group includes the emergence of platforms in artesian basins and the largest occurrences in artesian basins of folded areas with steam collectors;

second group: place of origin with complex hydrological conditions due to changes in the thickness, structure of horizons and filtration properties of water-bearing rocks or with complex hydrochemical and hydrothermal conditions;

third group: origin with very complex hydrological, hydrochemical and geothermal conditions: thermal energy waters are associated with aquifers of unevenly fractured and castrated rocks. 

If the second and third groups can actually be detected during geological and seismic observations, then the first group is much more difficult to detect without starting production.

That is why thermal energy waters are a problem for subsoil users, including investors in production sharing agreements.

What are thermal energy waters? The answer can be formulated as follows.

1. Economic approach. Thermal energy waters are an additional mineral raw material that does not require a special permit for extraction. At the same time, calculations are required for the construction of thermal centers for its accumulation and transportation of heating elements.

2. Investment approach. Circulation of thermal energy water in large quantities creates a situation where neighboring subsoil areas that are put up for tender and offered for licensing at a higher price or a situation arises where there are grounds for declaring the territory of the deposit area a reserve, or the issue of developing a sanatorium and resort area is studied.

3. Environmental approach. The issue of thermal energy water entering wells should be resolved not in favor of their extraction, but by choosing the drilling point.

The investment attractiveness of production sharing agreements compared to traditional licensed methods of production has one major advantage, namely the area of ​​the subsoil plot. 

That is, the chances of bypassing the investop aquifers are much greater than in areas with small areas for drilling.

Design of pilot-industrial field development

Based on the approved technological indicators for the field development, project documents are prepared for its development (up to 5 years)...