Saturday, June 20, 2026

Technical and economic feasibility of using thermal energy waters in production sharing agreements

For the most effective study of the location of thermal energy waters, it is necessary to adhere to the stages of geological exploration work, and to conduct a timely geological and economic assessment of the research results.

Study of the location should be sufficient for a reliable assessment of thermal energy water reserves.

Based on the results of the preliminary investigation, a feasibility report is prepared and temporary conditions are developed.

In cases where the explored thermal energy waters are intended for heat supply of small facilities and temporary conditions do not exist.

Operational reserves of thermal energy waters are divided into balanced (absorbed using technologies) and unbalanced (the use of which is temporarily impractical) according to their purpose.

Materials for calculating thermal energy water reserves should include: 

a) an assessment of the total operational reserves of groundwater at the place of origin, the degree of their exploration; 

b) recommendations for the operation mode; 

c) issues of sanitary protection of groundwater; 

d) an assessment of the impact of water abstraction at the expense of water consumption on existing water intakes, as well as on surface sources, ecological and other natural conditions of the area.

If necessary, additional exploration of flanks and aquifers may be carried out at the source of thermal energy waters involved in industrial development.

When transferring the place of origin, a control check of the wells must be carried out to determine the flow rates, gas saturation temperature, water composition, and the tightness of the space.

No comments:

Post a Comment

Design of pilot-industrial field development

Based on the approved technological indicators for the field development, project documents are prepared for its development (up to 5 years)...