Subsoil users, in particular large investors in production sharing agreements in Ukraine, are thinking not only about how to increase production, but also about how to save raw materials.
Against the backdrop of constant shelling of infrastructure, the Ukrainian government is thinking about storage projects for hydrocarbons.
Of course, the topic of storage will be a hot topic for investors, so let's try to figure out what the requirements are for a storage project.
Aquifers or depleted deposits are used as objects for storing hydrocarbons.
Suitable for storing, for example, gas, are objects with porosity with an average area of 10-15% aquifers or occurrence in reservoirs of up to 5% in fractured rocks.
The assessment of the state of the depth of aquifers is carried out in parameters up to 1000 m.
For a reliable assessment of the suitability of objects in terms of capacities and reservoir properties, the density of the drilling grid should be selected taking into account the flowability of the layers and the distribution of geological and physical indicators.
n this case, the core removal rate should be no less than 75%.
When penetrating exploration wells of low-cement reservoirs, the core removal rate should be no less than 50%.
The values of the object are verified by calculation under conditions of inadmissibility of the appearance of vertical cracks at maximum gas pressure.
Gas permeability is calculated by laboratory tests so that the excess gas pressure is greater than the hydrostatic pressure.
To ensure the long-term operation of storage facilities in the cross-section of planes to match the contour of the aquifer structure above the reservoir layer, buffer gas accumulations should be established in the event of column overflows.
The use of aquifers is not allowed during the period of cyclic operation. The condition and tightness of the overlying rocks of the well are monitored.
In depleted formations where no fluid overflows are observed, gas saturation is determined by hydrodynamic methods based on the water sampled and the separated gas.
No comments:
Post a Comment