Saturday, July 4, 2026

Well preservation issues in production sharing agreements

Well conservation is a preparatory and final stage in the production process.

However, is conservation the final stage of a production sharing agreement? 

This is a very difficult fact to state definitively from the point of view of implementing a production sharing agreement.

Here is the explanation.

1. The production sharing agreement does not end with a list of wells. The parties to the agreement expand the area of ​​implementation of the industrial development program to new coordinate points.

2. Well conservation does not remove the issue of completing the environmental supervision project for the site.

3. Well conservation is financed by a separate fund.

4. Before the start of conservation, property issues of newly created objects and their legal fate are clarified.

Well preservation differs in:

1) hydrothermal wells;
2) wells with unstable static pressure;
3) in regions with low temperatures.

Conservation of hydrothermal wells begins with filling the wellbore with formation water. 

The pump and compressor pipes rise above the roof of the productive horizon by half the depth of the well.

When preserving wells with unstable static pressure, regardless of the reservoir temperature, such wells are filled with a solution.

At peak sub-zero temperatures in all conservation wells, the wellbore is filled with a 30% chloride solution.

A fountain armature with a control valve is installed at the mouth of the conservation well. 

The mouths are fenced, the armature overhangs are removed, the manometer nozzles are sealed, the flanges are equipped with plugs.

No comments:

Post a Comment

Design of pilot-industrial field development

Based on the approved technological indicators for the field development, project documents are prepared for its development (up to 5 years)...