In conditions of drilling wells in depleted deposits and creating underground storage facilities, the following actions must be taken:
-prevention of open gushing of griffin formations;
- prevention of absorphion of washing fluid;
- prevention of collapses of well walls;
- prevention of interlayer flows during the development and operation of wells;
- to provide reliable waterproofing in drilled wells;
- ensure the necessary tightness and cementation of the columns lowered into the well.
All layers with signs of secondary gas bearing (technogenic occurrences), detected during drilling according to gasometry data, core analysis, geophysical logging, direct gas occurrences, must be studied with the aim of collecting and utilizing gas.
Opening of aquifers (if there is gas in the storage) is carried out by installing anti-vibration equipment at the mouths of all wells.
Geological service engineers are recommended to develop
''Uniform Technical Rules for Conducting Work When Drilling Wells'', ''Special Requirements for Well Construction'', ''Guide to Preventing Open Flow''.
The density of the flushing fluid for opening gas-saturated formations is set depending on the formation pressure and the depth of the formation.
Gas-saturated and permeable aquifers exposed by exploration wells must be isolated from each other by cementing casing strings.
When testing and operating in exploratory wells penetrating horizons, each such horizon is tested separately.
After the study is completed, the horizon is isolated by placing a cement bridge in the well.
The tightness and reliability of the bridge is checked without fail, and the results are confirmed by a bilateral act.
No comments:
Post a Comment